Which Robot Models Are Compatible with the NXB-KIT-761-006 Maintenance Kit?
This article lists the specific NexBot articulated robot models compatible with the NXB-KIT-761-006 Multi-Part Maintenance Kit for the 8,000-hour service interval.
Related Products
Article
Question
What are the specific NexBot industrial robot models that are officially supported for use with the NexBot Drives 761-006 Multi-Part Maintenance Kit?
Answer
The NXB-KIT-761-006 Multi-Part Maintenance Kit is designed for the scheduled 8,000-hour preventative maintenance service on the following NexBot articulated robot series:
- NexBot R-10 Series Articulated Robots
- NexBot R-20 Series Articulated Robots
- NexBot R-50 Series Articulated Robots
Specifically, this kit is compatible with the following robot model SKUs:
- NXB-ROB-LA013-001
- NXB-ROB-LA013-002
- NXB-ROB-LA013-003
- NXB-ROB-LA013-004
- NXB-ROB-LA013-005
- NXB-ROB-LA013-006
Using this kit ensures that you have all the necessary, factory-approved consumable parts for a single maintenance cycle, which simplifies procurement and guarantees component compatibility.
Kit Contents and Purpose
The NXB-KIT-761-006 is a comprehensive kit containing essential items for maintaining robot performance and longevity. Each component has a specific role in the 8,000-hour service procedure:
- Lubricant Cartridge (Type H-2): This specialized grease is formulated for the high-stress, precision gearboxes within the robot's joints. Proper lubrication is critical for minimizing wear and maintaining motion accuracy.
- Replacement Battery for Absolute Encoder Backup: This battery maintains the robot's positional data (absolute encoder values) when main power is removed. Replacing it prevents loss of origin data, which would require a time-consuming mastering procedure.
- Joint Cover Fastener Pack: A set of replacement fasteners for the joint access covers. These are often removed during maintenance and can become worn or lost. Using new fasteners ensures a secure and proper seal.
- Cooling Fan Filter Media (Set of 4): These filters prevent dust and debris from entering the robot controller and arm electronics, which is essential for proper thermal management and preventing premature component failure.
- Lint-Free Industrial Wipes (100-pack): Used for cleaning surfaces before applying new lubricant or sealing covers. They do not leave behind fibers that could contaminate sensitive components.
- Disposable Applicator Swabs: For precise application of lubricant to smaller components and for cleaning hard-to-reach areas within the joint assemblies.
Verification
To confirm that the NXB-KIT-761-006 is the correct kit for your robot, follow these steps:
- Identify Your Robot's Model/SKU: Locate the data plate on the base of your NexBot robot arm. The model number and SKU (e.g., NXB-ROB-LA013-001) will be listed there.
- Cross-Reference with the Compatibility List: Compare the SKU from your robot's data plate with the list provided in the 'Answer' section of this article.
- Check Your Maintenance Manual: Your robot's specific maintenance manual will list the required preventative maintenance kit part number for the 8,000-hour service interval. This is the ultimate source of truth for your specific machine.
Important Considerations
- Service Interval: This kit is intended for the 8,000-hour service interval. Using it at other intervals may result in unnecessary replacement of parts. Always follow the schedule outlined in your robot's service manual.
- Safety First: All maintenance procedures must be performed by qualified personnel. Ensure the robot is properly powered down and that all safety lockout/tagout (LOTO) procedures are followed before beginning any work.
- Single Use: The NXB-KIT-761-006 contains all parts for one complete maintenance service on a single robot. Do not attempt to split the contents across multiple robots or service intervals.