NexBot Robotics Knowledge Base

Which robots are compatible with the NXB-GEN-821-005 IP67 Joint Cover?

This article provides compatibility information for the NexBot Robotics 821-005 IP67 Joint Cover, detailing its function and use with R-20, R-50, and C-10 series robots.

FAQ Beginner Estimated time: 15 minutes Updated: 2026-02-25 Michael Torres, Field Service Manager

Related Products

NXB-GEN-821-005

Tools Required

  • Hex key set (metric)
  • Lint-free cloth
  • Isopropyl alcohol

Article

Question

What is the purpose of the NexBot Robotics 821-005 IP67 Joint Cover, and which specific robot models and joint positions is it designed for?

Answer

The NexBot Robotics 821-005 IP67 Joint Cover is a protective component designed to shield the critical articulation points of NexBot industrial robots from environmental hazards. Its primary function is to prevent the ingress of contaminants such as dust, debris, metal shavings, and liquids into the sensitive internal mechanisms of the robot's joints. By maintaining a clean internal environment, the cover helps extend the robot's operational lifespan, improve reliability, and reduce the need for unscheduled maintenance.

Key Specifications

  • Part Number: NXB-GEN-821-005
  • Product Name: NexBot Robotics 821-005 IP67 Joint Cover
  • Ingress Protection Rating: IP67, indicating it is fully protected against dust and can withstand temporary immersion in water.
  • Dimensions: 210 x 185 x 150 mm
  • Material: High-durability, chemical-resistant polymer composite.

Compatibility Information

The NXB-GEN-821-005 cover is specifically engineered for use on the following joint positions and robot series:

Compatible Joint Positions:

  • J2 (Axis 2)
  • J3 (Axis 3)

Compatible Robot Series:

  • NexBot R-20 Series (Articulated): This cover fits the J2 and J3 joints on all standard R-20 models.
  • NexBot R-50 Series (Articulated): This cover is compatible with the J2 and J3 joints on R-50 series robots.
  • NexBot C-10 Series (Collaborative): This cover provides IP67 protection for the J2 and J3 joints of the C-10 collaborative robot.

Verified Compatible Robot Models:

  • NXB-ROB-MA012-008
  • NXB-ROB-FLR022-001
  • NXB-ROB-FLR022-003
  • NXB-ROB-FLR022-005
  • NXB-ROB-FLR022-007
  • NXB-ROB-LA013-001

Installation Tips

While a detailed installation guide is available separately, please consider the following tips when fitting the NXB-GEN-821-005 Joint Cover:

  1. Safety First: Ensure the robot is powered down and locked out according to your facility's safety procedures before beginning any work.
  2. Clean Surface: Before installing the cover, thoroughly clean the robot joint's mounting surface to remove any grease, oil, or debris. This ensures a proper seal and prevents contaminants from being trapped inside.
  3. Inspect Seals: Before final assembly, inspect the integrated seal on the cover for any damage or defects that could compromise the IP67 rating.
  4. Secure Fasteners: Tighten the mounting hardware evenly and to the torque specified in the robot's maintenance manual. Do not overtighten, as this can damage the cover or the seal.

Related Topics

  • How to Install the 821-005 Joint Cover
  • Preventive Maintenance Schedules for R-20 and R-50 Series Robots
  • Understanding IP Ratings for Industrial Equipment

Keywords

NXB-GEN-821-005 joint cover IP67 robot cover robot protection R-20 series R-50 series C-10 series J2 joint J3 joint